Upstream channel 0 Hz not locked
Modem: Netgear CG3000DCR Checking out the internal configuration of my device I noticed this on the Cable Modem Upstream Channel status box. Is this a correct setting? Thank you.
View ArticleOption: Disable Gateway Smart Packet Inspection
Modem: Netgear CG3000DCR Seems like this option should be enabled but it currently has a checkbox to disable. Please advise. Thank you.
View ArticleNetgear CG3000DCR and two wifi routers
I work from home and have my CG3000DCR, and an Apple router behind it.My wife just took a work from home job, and we have a need to have a total separate network, including remote INBOUND VPN to her...
View ArticleExtend network with multiple routers
I am looking to extend our wifi network so it better covers the rooms we need it in. We've setup a wifi extender, but the service gets really spotty in rooms furthest from the main wifi router. Running...
View ArticleStatic Routes No Longer Working Properly
Occasionally I have to set up a lab environment for testing and in the past I used static routes configured on the Comcast supplied Netgear firewall/modem to all access to the various lab subnets. I...
View ArticleSMC Business Gateways Cannot Upload More than 12 Mbps on a 20/100Mbps Package
Ok so as a business customer with 5 different locations in the Central Illinois area, I am really not happy at this point with Comcast and frankly I'm tired of getting screwed over constantly. Several...
View ArticleHaving trouble with the SMC and routing from LAN to the True Static IP
I have aVendor NameSMC NetworksHardware Version1.01Serial NumberH2120223CA6FFirmware Version3.1.6.57Operating ModeRG(cool, pasting that table seems to work!) I have a Linux server running on the Static...
View ArticleNew Mikrotik Router will not route Internet traffic
We currently have a Netgear WiFi Router that connects to a Comcast Internet with a Static IP and then to our Netgear Switch. I have added a Mikrotik CRS as another switch and that is working fine. I...
View ArticleCG3000DCR Bridging Questions
I do not have a static IP and I want to use the CG3000DCR as my modem only and use my Cisco RV325 as my router. Does the CG3000DCR need to be placed in " true bridged" mode by Comcast or can I get this...
View ArticleBridge mode with a /28 and router behind the Cisco DPC3941B
I am a business customer with a /28 of public IPs (13 usable). I was issued a Cisco DPC3941B device. I have a Mikrotik CCR 1009 router running behind the DPC3941B. I have read two opposite answers to...
View ArticleBest VPN modem to put behind a cg3000dcr
To All, Thank you in advance. The problem I have is I lose so much speed when I have the VPN hooked up. I have everything hooked up wire not wireless and the best I can get is 22 download I pay for...
View ArticleClik here to view.
DPC3941B web interface 'static routing' screen doesn't work - need to add...
Note that this is not about 'static ip' which are configured through a dynamic routing protocol. This is about adding a fixed route to the routing table, labeled as 'static routing' in the user...
View Articlecg3000dcr no access to web interface
Recently, I needed to check something in my Netgear gateway and was unable to access the web interface at 10.1.10.1 I restarted the modem 2 days ago and was able to access the interface, but an attempt...
View ArticlePrefix delegation bugs with Cisco 3941?
Is anyone aware of bugs in the prefix delegation support on the Cisco 3941?
View ArticleTrue Bridge Mode
If I where to use this forum to request that our modem gets set to "True Bridge Mode", what would the turn around time be? Reason I ask, I am not always physically in the office and I would want to be...
View ArticleStatic IP + local LAN = ICMP redirect?
Router: SMCD3G-CCR I have several (linux) machines with public static IPs visible to the outside world. Let's call these machines the "A" group. I also have machines on the local LAN (10.x.x.x) that...
View ArticleInternet connection down - DPC3939B
When I was helping a friend with one of the small networks for which he is responsible, I notice the DPC3939B gateway on one of his networks had bridge mode disabled, had private WiFi (2.4GHz and 5GHz)...
View Articleplease reset default gateway password
Hi, I can't log in to the router. The default password doesn't work with cusadmin. Please, reset them.
View Article